Manual and hydraulic tool traps for wireline pressure control. Rated 35–105 MPa, alloy steel, H2S service, lubricator ID 62–102 mm. Contact CAMTOP for a quote.
CAMTOP Manual Tool Trap / Hydraulic Tool Trap | 35–105 MPa Wireline Pressure Control
£0.00
Description
CAMTOP Manual Tool Trap / Hydraulic Tool Trap
35 MPa – 105 MPa Wireline Pressure Control Equipment | Alloy Steel | H2S Service
Product Overview
The CAMTOP Manual Tool Trap and Hydraulic Tool Trap are essential wireline pressure-control safety devices installed between the lubricator and the wellhead. They are designed to prevent wireline tools, instruments, or swabs from falling into the wellbore in the event of accidental cable stretch, cable break, or unexpected release of the tool string after it has been lifted into the lubricator.
The tool trap is normally closed when not actively passing tools and is opened only when the tool string is being run in or pulled out. Both manual and hydraulic actuation options are available to suit surface-control preferences and operational automation levels. The body is manufactured from high-strength alloy steel and is suitable for oil, gas, and H2S-containing service conditions.
Working Pressure: 35 MPa – 105 MPa (5,000 psi – 15,000 psi) | Lubricator ID: 62 mm – 102 mm | Working Temperature: Up to 220°C (425°F) | Material: Alloy Steel | Actuation: Manual or Hydraulic
Product Image
CAMTOP Manual Tool Trap / Hydraulic Tool Trap — high-strength alloy steel construction for wireline pressure control
Key Features
- Wireline Safety Protection: Prevents tools and instruments from falling into the well if the cable stretches, breaks, or is released unexpectedly
- Manual or Hydraulic Actuation: Available in both manual and hydraulic control configurations to match rig surface-control setup
- High-Strength Alloy Steel Body: Forged or cast alloy steel construction for reliable pressure containment in high-pressure wireline service
- Wide Pressure Range: Rated from 35 MPa up to 105 MPa (5,000 psi to 15,000 psi) for standard, high-pressure, and ultra-high-pressure wells
- H2S / Sour Service Compatibility: Suitable for oil, natural gas, and H2S-containing working environments
- High-Temperature Service: Working temperature up to 425°F (220°C) for high-temperature well conditions
- Compact Lubricator Integration: Lower-end connections match standard lubricator IDs from 62 mm to 102 mm
- Normally-Closed Design: Tool trap closes automatically when not in operation, enhancing well-control safety
- API / ISO Compliance: Designed and manufactured in accordance with API and ISO quality standards for pressure control equipment
Technical Specifications
| Item | Specification |
|---|---|
| Product | CAMTOP Manual Tool Trap / Hydraulic Tool Trap |
| Material | High-Strength Alloy Steel |
| Lubricator ID | 62 mm – 102 mm (2.44″ – 4.02″) |
| Working Pressure | 35 MPa – 105 MPa (5,000 psi – 15,000 psi) |
| Working Temperature | Up to 220°C (425°F) |
| Working Medium | Oil, natural gas, and H2S-containing fluids |
| Actuation Type | Manual or Hydraulic |
| Service Environment | Standard (STD) and H2S / Sour Service |
| Application | Oil and gas well wireline operation |
| Design Standard | API / ISO pressure control equipment standards |
Product Model Selection Table
| Model | Working Pressure (MPa) | Lower End Lubricator ID (mm) | Lower End Connection | Control Type | Service |
|---|---|---|---|---|---|
| Tool Trap 6-35 | 35 | 62 (65) | 4-1/4″ – 6 SA | Manual / Hydraulic | HS / STD |
| Tool Trap 7-35 | 35 | 76 (78) | 5″ – 4 ACME | Manual / Hydraulic | HS / STD |
| Tool Trap 6-70 | 70 | 62 (65) | 4-3/4″ – 4 ACME | Manual / Hydraulic | HS / STD |
| Tool Trap 7-70 | 70 | 76 (78) | 5-3/4″ – 4 ACME | Manual / Hydraulic | HS / STD |
| Tool Trap 7-105 | 105 | 76 (78) | 7″ – 5 ACME | Manual / Hydraulic | HS / STD |
| Tool Trap 10-70 | 70 | 102 (103) | 8-3/8″ – 4 ACME | Manual / Hydraulic | HS / STD |
| Tool Trap 10-105 | 105 | 102 (103) | 9-1/2″ – 4 ACME | Manual / Hydraulic | HS / STD |
Working Principle
The CAMTOP Tool Trap is installed at the lower end of the lubricator or wireline pressure-control stack, directly above the wellhead or Christmas tree. Its internal mechanism is normally closed when the tool string is stationary in the lubricator or when wireline operations are paused.
When the tool string is being lowered or retrieved, the operator (or hydraulic control unit) opens the trap to allow the tool string to pass through. If the cable is accidentally stretched, parted, or released while the tool string is still above the wellhead, the trap immediately closes, catching the tool string and preventing it from falling into the wellbore. This protects both the downhole tools and the wellbore from damage and lost-in-hole incidents.
For the hydraulic version, a surface-mounted control panel or hydraulic power unit provides remote actuation, allowing faster operation and integration with automated wireline units. The manual version uses a handwheel or lever mechanism for direct mechanical operation.
Applications
- Wireline logging, perforating, and well intervention operations
- Slickline and electric-line pressure-control stacks
- High-pressure oil and gas wellhead pressure control
- Sour-service (H2S-containing) wireline operations
- High-temperature well environments up to 425°F
- Offshore and onshore drilling / production wireline units
- Coiled-tubing and snubbing auxiliary pressure-control setups
Ordering Information
When requesting a quote, please specify the following parameters so we can select the correct model and material configuration:
- Model / Size: Lubricator ID (62 / 76 / 102 mm) and pressure rating (35 / 70 / 105 MPa)
- Actuation Type: Manual or hydraulic control
- Lower End Connection: ACME or SA thread specification
- Service Environment: Standard or H2S / sour service
- Working Temperature: Ambient or high-temperature service
- Quantity Required: For pricing and delivery schedule
Why Choose CAMTOP
- Specialized manufacturer of oilfield wireline pressure control equipment
- Alloy steel construction with full material traceability
- Manual and hydraulic options available from stock programs
- API / ISO quality management and inspection procedures
- Application engineering support for lubricator stack integration
- Competitive pricing with fast delivery from China
Contact Us
For pricing, technical support, or to place an order, contact CAMTOP directly:
Email: sales@cposl.com
WhatsApp / Phone: +86 186 2172 3891
Address: Shanghai, China
Reviews
There are no reviews yet.