Description: Hydrocyclone desilter is usually set behind Desander separator
Sand size solids removal (12~47 microns)
Polymeric cones
Lightweight, compact
Customized cone configuration specific to customer needs
S.S Clamp and flange type optional
Lifting eye welded to frame
Better effect for subsequent process
Durable and low cost replacement
Save much space and provide easy handling
More flexible, user-friendly and proper cost
Provide easy control on treating capacity
Give user convenience on cones installation, etc.
Better to protect equipment when handle and transport

Model CNQ100 CNQ125
Treating capacity <240m3/h (1056GPM) <300m3/h( 1320GPM)
Desilter cones 4″ 5″
Cones quantity 4~12EA 4~12EA
Working pressure 0.15~0.35Mpa
Feed inlet 100-150mm
Discharge output 125-200mm
Separation size 12~47^m
Bottom shaker screen 1.0m2 (600 x1600mm) Optional

CNQ Desilter separator is one important equipment among whole drilling mud system. Usually separate finer particles after desander hydrocyclones. The bottom shaker is optional to get better filtration effect. For oil dirlling mud solids control, the desilter cones are 4″. According to clients’ requirement the size can be 3″ also. Under proper working pressure, the separation efficiency will be 90~95%.